Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Wheels Manufacturing Axle-09
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits Campagnolo / Italian rear hubs with 135mm spacing - Type: Hollow Axle - Threads: 10mm x 26tpi - Diameter: 10mm - Length: 146mm - 1 axle per bag
Wheels Manufacturing Axle-14
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese front hubs - Type: Solid Axle - Threads: 9mm x 1 - Diameter: 9mm - Length: 155mm - 1 axle per bag
Wheels Manufacturing Axle-34
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 24tpi - Diameter: 9.5mm - Length: 180mm - 1 axle per bag
WTB KOM Tough 29-inch
$94.95
Built for bashing, whether on a gravity shred sled or fully loaded bikepacking rig, WTB's KOM Tough rims are extruded from top-tier alloy to provide utmost durability at a reasonable weight. Their legendary I-Beam construction has evolved to further reinforce the rim with dual support beams that provide increased strength and stiffness for the world's most aggressive riders. KOM Tough rims are proven on the toughest tracks of the Enduro World Series, depended on for daily trail rides, and trusted while bikepacking in remote regions of the world. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area.
Stan's No Tubes Flow EX3 27.5-inch Rear Wheel
$450.00
- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Hub Model: E-SYNC - Freehub Body: Shimano HG - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall
Stan's No Tubes Neo Durasync Freehub
$80.00
Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. This CNC machined durasync freehub is a direct replacement for your Neo hub, and includes pawls, springs, pawl retaining ring, and red freehub spacer. Bearings are pre-installed. - 6-pawl system provides 36 points of contact and 10-degree engagement for quick acceleration - Chromed steel bearings - Wide bearing stance and axle design reduces flex and adds durability - Low drag main seal prevents contamination and reduces resistance - Mini Driver has a Shimano HG spline, but is 10mm shorter to accept 11-speed cassettes with 10t cogs from Hope and OneUp Components
Stan's No Tubes Neo Replacement Rear Axle
$18.00
Replacement rear axle for Neo and Neo Ultimate hubs. High-precision center-less ground treatment ensures perfect bearing fit.
Sta-Tru 20-inch Rear Wheel
$65.49
Sta Tru Rear Wheels - Single Wall rim - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher
Problem Solvers Axle Nut
$2.99
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
Enduro Max
$9.99
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
DT Swiss 350 J-Bend Rear Hub
$350.00
The new standard for durability and price. - Patented Star-Ratchet system - Contact-free seals and high precision build guarantee smooth bearings - Press-fit end caps allow tool-free maintenance and conversion
DT Swiss DT Swiss 15mm to 5mm QR conversion kit for 350 and 370 hubs
$24.99
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
DT Swiss M 1900 Spline Rear Wheel
$352.90
After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring
DT Swiss Pro Head Brass Nipples
$0.25
Developed for short spokes with a large deflection angle. DT Pro Head nipples are designed for short spokes with a large angle of deflection, such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to consistent power transmission. Note: brass nipples are not approved for children's products in the USA. See attached warning! All-brass nipples are recommended for e-bike use. - Weight: starting at 59g for 64 nipples.
DT Swiss Pro Head Spoke Reinforcement Washers for SPLINE One
$0.25
Pro Head Reinforcement System (PHR) has a larger and more spherical contact area and is designed to balance loads transferred to the rim. The PHR system acts as a ball and socket interface, allowing the spoke to pivot into alignment while maintaining even, consistent contact during installation in order to follow the perfect trajectory from the hub to the rim.
DT Swiss RWS MTB Front Thru Bolt
$50.00
The mounting solution for thru-bolt front wheels. Designed for an axle diameter of 9mm in the front, the thru-bolt system is a special kind of axle mounting for bikes. The DT Swiss thru-bolt system is compatible with standard quick-release dropouts but requires hubs that are compatible with the Thru Bolt. The stronger wheel connection results in greater stiffness. - Overall Length: 115mm - Thread Pitch: M9 x 1.0mm - Flat Washer
DT Swiss Standard Aluminum Nipples
$0.75
The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples
DT Swiss XR 1700 SPLINE 29-inch Rear
$539.90
Snappy acceleration is what you can expect from this aluminum wheel developed to meet all cross country needs. If, to you, cross country means high-speed, after-work rides, and the occasional endurance race, then you should have a closer look at the XR 1700 SPLINE wheels. With a light and welded cross country aluminum rims, reliable 36T RATCHET SL hubs, and Swiss precision finish, all the way from the competition spokes to the signature DT Swiss wheel build quality, it's a wheelset that is up to competing, day-in, day-out, against yourself, against your buddies, or in an all-out race.
DT Swiss XR 1700 SPLINE Front Wheel
$372.90
If cross country means high speed after work rides and the occasional endurance race to you, then have a closer look at the XR 1700 SPLINE wheel. The lightweight and welded aluminum rim, laced with competition spokes and reliable 350 hub, create a snappy accelerating wheel. - Welded Aluminum rim with 25mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for Cross Country applications
Bontrager Bontrager Rectangular Base TLR Valve Stem
$9.99 - $12.99
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Silver MTB valve is compatible with all Bontrager Mountain wheels except: Line XXX, Kovee XXX, and Line Pro 40 - Alloy Road Tubeless Rim Valve is compatible with all Bontrager alloy TLR road wheels
Bontrager Bontrager Rectangular Base TLR Valve Stem
$11.99
Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips The valves you need to upgrade to Tubeless These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Product details - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Use only with Bontrager TLR rim strip with rectangular base - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Sold as singles
Bontrager Line Comp 30 TLR Boost MTB 27.5-inch Front
$174.99
Line Comp 30 is a durable alloy mountain wheel built on wider rims for better tire support. With more support, you can run lower tire pressure for better traction, more control, and a smoother ride. This trail-tough wheel stands up to hard hits, has a proven Tubeless Ready (TLR) design, and includes a 108-tooth Bontrager Rapid Drive hub for quick engagement, fast acceleration, and long-lasting performance. - Rapid Drive 108, j-bend hub instantly transfers effort into forward momentum - Updated rim design and stronger G609 alloy stands up to hard hits - Tubeless Ready (TLR) rims allow for a quick, easy transition to tubeless system - Wider Boost 110/148 hub flanges enhance bracing angle for stiffer wheel - Durable G609 alloy rim with 29mm internal, 33mm external width, 28 hole front/rear - 14G spokes with brass locking nipples - 6 bolt disc, SRAM XD driver, Shimano 10/11 speed available separately - Includes TLR rim strip installed and TLR valve
Bontrager Line Comp 30 TLR Boost MTB 27.5-inch Rear
$225.00
Line Comp 30 is a durable alloy mountain wheel built on wider rims for better tire support. With more support, you can run lower tire pressure for better traction, more control, and a smoother ride. This trail-tough wheel stands up to hard hits, has a proven Tubeless Ready (TLR) design, and includes a 108-tooth Bontrager Rapid Drive hub for quick engagement, fast acceleration, and long-lasting performance. - Rapid Drive 108, j-bend hub instantly transfers effort into forward momentum - Updated rim design and stronger G609 alloy stands up to hard hits - Tubeless Ready (TLR) rims allow for a quick, easy transition to tubeless system - Wider Boost 110/148 hub flanges enhance bracing angle for stiffer wheel - Durable G609 alloy rim with 29mm internal, 33mm external width, 28 hole front/rear - 14G spokes with brass locking nipples - 6 bolt disc, SRAM XD driver, Shimano 10/11 speed available separately - Includes TLR rim strip installed and TLR valve
Bontrager Line Comp 30 TLR Boost MTB 29-inch Front
$199.99
Line Comp 30 is a durable alloy mountain wheel built on wider rims for better tire support. With more support, you can run lower tire pressure for better traction, more control, and a smoother ride. This trail-tough wheel stands up to hard hits, has a proven Tubeless Ready (TLR) design, and includes a 108-tooth Bontrager Rapid Drive hub for quick engagement, fast acceleration, and long-lasting performance. - Rapid Drive 108, j-bend hub instantly transfers effort into forward momentum - Updated rim design and stronger G609 alloy stands up to hard hits - Tubeless Ready (TLR) rims allow for a quick, easy transition to tubeless system - Wider Boost 110/148 hub flanges enhance bracing angle for stiffer wheel - Durable G609 alloy rim with 29mm internal, 33mm external width, 28 hole front/rear - 14G spokes with brass locking nipples - 6 bolt disc, SRAM XD driver, Shimano 10/11 speed available separately - Includes TLR rim strip installed and TLR valve
Bontrager Line Comp 30 TLR Boost MTB 29-inch Rear
$224.99
Line Comp 30 is a durable alloy mountain wheel built on wider rims for better tire support. With more support, you can run lower tire pressure for better traction, more control, and a smoother ride. This trail-tough wheel stands up to hard hits, has a proven Tubeless Ready (TLR) design, and includes a 108-tooth Bontrager Rapid Drive hub for quick engagement, fast acceleration, and long-lasting performance. - Rapid Drive 108, j-bend hub instantly transfers effort into forward momentum - Updated rim design and stronger G609 alloy stands up to hard hits - Tubeless Ready (TLR) rims allow for a quick, easy transition to tubeless system - Wider Boost 110/148 hub flanges enhance bracing angle for stiffer wheel - Durable G609 alloy rim with 29mm internal, 33mm external width, 28 hole front/rear - 14G spokes with brass locking nipples - 6 bolt disc, SRAM XD driver, Shimano 10/11 speed available separately - Includes TLR rim strip installed and TLR valve
Bontrager Line Elite 30 TLR Boost 29 MTB Front
$455.99
A strong, durable, OCLV Carbon MTB wheel with best-in-class impact strength, durability, and resistance to pinch flats. Warrantied for life This durable carbon mountain bike wheelset keeps the good times rolling. It delivers performance on any trail and durability against any rocks you can't avoid. Line Elite 30's robust rim profile delivers best-in-class strength and durability and resists pinch flats. Plus, simple tubeless setup makes it easy to run lower pressure for more confidence and a smoother, faster ride. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If your wheel sustains damage from riding within two years of ownership, we'll replace them. It’s that easy. Product details - OCLV carbon offers an optimized blend of weight, strength, and durability - Rim profile and hook bead design adds impact strength and helps prevent pinch flats - Rapid Drive 108 hub with 3.3 degrees of engagement for quick, confident energy transfer - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Boost 110/148, 28 front/rear Grand Forza 14/15G spokes with Alloy hex nipples - 29mm internal, 38mm external width, 28 hole front/rear - 6 bolt disc, SRAM XD: Shimano 10/11 and MicroSpline driver available separately - Warrantied for life, no rider weight limit
Bontrager Line Elite 30 TLR Boost 29 MTB Rear
$495.99
A strong, durable, OCLV Carbon MTB wheel with best-in-class impact strength, durability, and resistance to pinch flats. Warrantied for life This durable carbon mountain bike wheelset keeps the good times rolling. It delivers performance on any trail and durability against any rocks you can't avoid. Line Elite 30's robust rim profile delivers best-in-class strength and durability and resists pinch flats. Plus, simple tubeless setup makes it easy to run lower pressure for more confidence and a smoother, faster ride. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If your wheel sustains damage from riding within two years of ownership, we'll replace them. It’s that easy. Product details - OCLV carbon offers an optimized blend of weight, strength, and durability - Rim profile and hook bead design adds impact strength and helps prevent pinch flats - Rapid Drive 108 hub with 3.3 degrees of engagement for quick, confident energy transfer - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Boost 110/148, 28 front/rear Grand Forza 14/15G spokes with Alloy hex nipples - 29mm internal, 38mm external width, 28 hole front/rear - 6 bolt disc, SRAM XD: Shimano 10/11 and MicroSpline driver available separately - Warrantied for life, no rider weight limit
Bontrager Line Pro 30 TLR Boost 29 MTB Front
$629.99
A light, durable, OCLV Carbon MTB wheel with best-in-class impact strength, durability, and resistance to pinch flats. Good things last A lightweight carbon mountain bike wheelset ready to tackle any trail and stand up to that rock you just didn't see. Line Pro 30 features best-in-class strength and durability and even helps prevent pinch flats. Plus, simple tubeless setup makes it easy to unlock their full potential and run lower pressure for more confidence and a smoother, faster ride. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If your wheel sustains damage from riding within two years of ownership, we'll replace them. It’s that easy. Product details - Ultra-durable OCLV Pro carbon provides a lighter layup for the ultimate in lightweight strength - Rim profile and hook bead design adds impact strength and helps prevent pinch flats - Rapid Drive 108 hub with 3.3 degrees of engagement for quick, confident energy transfer - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Boost 110/148, 28 front/rear DT Swiss Competition Race 14/16G spokes with Alpina alloy locking nipples - 29mm internal, 38mm external width, 28 hole front/rear - 6 bolt disc, SRAM XD: Shimano 10/11 and MicroSpline driver available separately - Warrantied for life, no rider weight limit
Bontrager Rapid Drive 108 Fat Rear Hub
$199.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high quality wheelset. Product details - Bontrager rear hub for use with 197mm dropouts - Rapid Drive 108 hub instantly transfers effort into forward momentum - Flange diameter: 58mm - NDS flange offset: 59.5mm - DS flange offset: 46mm - 32 hole, 6-bolt rotor
Bontrager TLR Rim Strip
$20.99
To be used exclusively with Bontrager Tubeless Ready (TLR) rims. The rim strips you need to upgrade to Tubeless These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Product details - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Use only with appropriate Bontrager TLR rim valve - Rim strip replacement is recommended if removed from the wheel - Sold as singles - White strip is recommended for carbon rims - TLR rim valve sold separately
Page 1 of 2 Next page