29-Inch

The Vittoria Agarro trail tire, Enduro inspired performance meets XC efficiency for your Trail bike. The Agarro trail tire is deigned to take you there and back, with a tread profile that gives considerably more grip than an XC tire, but with less bulk than an Enduro tread. - Leading edge steps for fast rolling (like a ramp), but better climbing in technical terrain at slow speeds - E-bike compatible tread profile is then wrapped on Vittoria’s tubeless-ready Trail casing, complete with APF inserts and sidewall protection, for added stability and protection

Martello hammers home the performance you expect, on the most demanding Enduro and DH courses. Looking for the one tire to tackle a wide range of courses? The Martello features a World Championship proven TNT bead, add the proprietary 4C Graphene compound, topped off with a moto-inspired tread design and progressive width siping. This last part is key, and provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that top racers expect. This design provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that riders expect. Whether shredding rocks, roots, or mixed terrain, Martello delivers.

The new Vittoria Mazza combines years of athlete input with cutting-edge tread technology, raising the bar on the mixed terrain Enduro tire category. Starting with a defined center tread, the Mazza uses deep siping in the direction of rotation, allowing the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp but digs in on climbs, making Mazza a top choice for both front and rear use. Substantial spacing was designed into the center tread to provide braking traction, while also accelerating mud clearing. Cornering on the Mazza is handled by Vittoria's trademark progressive sipe width technology, which gives a gummy inside effective edge without the instability that competitors experience on the outside of the tread. Simply put, bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex and translates into a predictable, confident, and communicative feel at the limit of cornering. Mazza's generous tread depth claws into a range of terrain and is stabilized with Vittoria's proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance and increased wear life. The bar has been raised. - Aggressive profile with ample sipe spacing for mixed terrain - Progressive sipe width for tactile grip on rocks and roots - Stepped leading-edge center-tread maintains speed and delivers climbing traction

The Mazza Race has been developed to provide the best combination of riding feeling and performance for technical trails at maximum speed. Deep siping allows the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp, but digs in on climbs, making Mazza a top choice for both front and rear use. - Generous tread depth claws into a range of terrain, and is stabilized with Vittoria’s proprietary 4C compound layering process, allowing the surface of the tread to remain tacky, while the base remains planted - Wach effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance, and increased wear life - Substantial room was designed into the center tread to provide braking traction, while also accelerating cleaning - Cornering is handled by Vittoria’s trademark progressive sipe width technology, which gives a gummy inside effective edge, without instability - New Enduro Race Casing with insert below the tread provides additional puncture protection

The XCO European Champion tire The Mezcal is the versatile all-rounder that gets you to the podium, time after time. Ride a combination of terrain? This is the choice of the pros. The Mezcal features a unique, low-profile tread that is tightly spaced in the center for low rolling resistance and durability. Countless effective edges work together to grip a variety of terrain, while directional siping on each knob find traction in the roots and rocks. The best tires are built with the best casing and compound, and the Mezcal TNT is no exception. Using the proprietary Graphene enhanced 4C compound, the Mezcal attains the holy grail of XC tires; grip, durability, and low weight. - Defined center-ridge tread for low rolling resistance

The muddiest DH course conditions possible have inspired the Mota DH tire. Intended for use on professionally maintained courses, the moto block spikes cut into soft terrain, providing world-class grip across the slickest surfaces. The Mota tread features the same progressive-width design as the Martello, which provides for a progressive fine-touch tactile feel on the effective edge. When the course demands the most aggressive tires possible, the Mota is your answer. - Ample spacing allows for immediate shedding of mud and debris - Progressive sipe-width pattern provides tactile grip at the knob surface without sacrificing speed or grip

Unstoppable on ups. Relentless on descents Syerra has been developed to satisfy the needs of the emerging Down Country segment, raising the limit of what a XC tire can do. Vittoria engineers combined in a single product Speed and Rolling Performance – typical features of the XC segment – together with High Grip and Resistance – traits of the Trail Segment. The result is a light and fast product which allow to have fun also when tackling burlier descents and gnarlier terrain. - High durability and maximum speed thanks to Graphene and 4 different kind of compounds - Outstanding grip performance: tread design engineered for multiple conditions - Safety and sidewall protection ensured by the Anti-Pinch Flat (APF) sidewall insert

Cruise in style with Schwalbe's Fat Frank. Their wide, round Balloonbike profile provides natural cushy suspension, and it rolls easily thanks to the smooth tread. It's also available in three colors to add panache to your cruiser. Weights: - 890 grams (29 x 2.0) - 975 grams (26 x 2.35)

THE ULTIMATE GRAVITY TIRE. Indisputably the favorite among Schwalbe Downhill and Enduro athletes, the Magic Marry offers perfect all-around characteristics for almost all tracks and conditions. The sophisticated intermediate profile is combined with the best compounds and construction, pushing the limits to surprising levels. - Strong shoulder studs and aggressive, open tread design provide maximum braking traction and cornering grip, even in extremely muddy terrain. - Equipped with V-Grooves specially developed for Magic Mary, every stud can bite into the ground for even more grip. - Angled studs in the middle of the tread optimize the rolling characteristics.

OUTSTANDING FOR FAST AND DRY XC TRACKS. Its low weight and extremely low rolling resistance makes it Schwalbe’s fastest MTB tire! - Multiple small, flat studs for fast and quiet rolling. - Numerous grip edges for hard ground. - Edged shoulder studs for good grip and control in curves.

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

The original Forekaster was designed as a wet weather option for XC, while the new version is aimed squarely at modern short travel (100mm-130mm) trail bikes - aka the “downcountry” segment. Intended to be a “Goldilocks” tire, the new Forekaster rolls fast but also provides solid cornering and braking traction in a broad range of trail conditions.

The Maxxis Forekaster features a spiky, well-spaced tread pattern that is ideal for XC racing or light duty trail riding in loose or wet conditions during the spring and fall. Use as a front paired with an Aspen or Ikon rear for an “aggressive” XC setup.

The Ikon is a lightweight, high volume XC tire that rolls fast and has ample tread to provide secure traction in varied conditions. - Ramped center knobs roll fast and provide excellent traction for climbing and braking - Progressive shoulder lugs deliver secure traction in the corners - Intended use: hardpack, loose, loose over hard, medium - MaxxSpeed is a high-silica content compound that reduces rolling resistance while also enhancing traction in wet conditions - EXO casing provides protection on sidewalls for extreme cut and abrasion resistance while remaining lightweight and highly flexible

The Maxxis Ikon is a versatile XC tire designed to perform in a broad range of conditions. With its predictable handling, the Ikon is also a favorite among our slopestyle athletes.

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The Rekon is an aggressive trail tire inspired by the Ikon - Designed for aggressive XC trails - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this, you can race more and scout less with the Rekon.

The Maxxis Rekon Race is a semi-slick XC race tire that features the lowest profile tread in our XC line. It is a great choice for dry XC trails and short track racing.

The Maxxis Rekon Race is a semi-slick XC race tire that features the lowest profile tread in our XC line. It is a great choice for dry XC trails and short track racing.

This versatile competition and trail tire is comfortable and sure-footed in the turns. It has good grip and is available with various technologies. - Smoothly rolling tire that adapts to any terrain with its special tread - Suitable for E-Bikes

- Versatile tread pattern suitable for a broad range of conditions - Medium-height center knobs are ramped to reduce rolling resistance and are staggered to provide a consistent feel across the profile of the tire - Side knobs are fairly aggressive and provide excellent cornering grip - Available with a wire bead or folding bead with EPS puncture protection

Kiss pinch flats goodbye with the Tubeless Ready CX3 Cyclocross tire. Run lower tire pressures and get traction performance that goes head-to-head with tubular tires for a fraction of the cost. - Excels in muddy and soft conditions - Tubeless Ready (TLR) for easy tubeless setup and puncture protection - Hard-Case Lite protects against punctures with superior, lightweight, sub-tread material - 120 TPI - Maximum pressure: 120psi - ETRTO: 33-622 - Weight: 405g

A dependable and versatile replacement tire that delivers traction on paths and trails yet rolls smooth and is efficient on pavement. STAY CONNECTED TO PATH The Connection Comp MTB Tire delivers confidence and traction on everything from city paths, trails, and even urban commutes. Smaller and more compact center knobs offer lower rolling resistance for a fast rolling tire while larger, more aggressive side knobs provide the traction over loose terrain and cornering confidence. PRODUCT DETAILS - Designed for trail, path, and street with a smooth-rolling tread for confident traction - Smooth-rolling center tread provides the perfect balance of traction and efficiency - Pronounced side tread adds confidence across unpaved trails and when cornering - A great option to replace your worn out tires with

This e-bike tire is designed for versatility with light tread for confident, smooth-rolling traction and approved for the unique demands of e-bikes at speeds up to 50km/h. E-bike approved The LT4 is an e-bike specific tire designed for confident traction and smooth-rolling performance for the speeds and needs of e-bike riders. The lightly treaded design adds versatility for both on and off the tarmac and is approved for electric bike use up to 50km/h. Reflective sidewalls increase visibility and the Hard-Case Lite puncture protection is optimized for the increased speeds and demands of e-bike riders. Product details - Designed for trail, path, and street with a smooth-rolling tread for confident traction - E-bike approved for speeds up to 50km/h - Designed to meet the unique demands of electric bike usage - Hard-Case Lite optimized for e-bikes with 1mm Kevlar puncture protection belt that offers great ride feel, and extra durability - Reflective sidewall strips for added visibility Specifications - TPI: 60 TPI - Durometer: 60a - Bead: Wire - Type: Clincher - Minimum pressure: 30psi - Max pressure: 50psi - ETRTO: 60-622 - Puncture protection: Hard-Case Lite - Studdable: No - Weight: 1000g